Fill in the specimen and ram details, or leave the sheet empty to print a blank format. Area of rams = n × πd²/4, load to be applied = 0.25 mm crack load requirement (kN/m) × length of pipe (m), and the matching gauge pressure (kg/cm²) are worked out as you type. Typed values are saved for this project.
| THREE EDGE BEARING TEST (0.25mm Crack Load) (As per IS:458 -2003 And IS :3597-1998) | ||||||||||
Lot No: |
Date of Testing: |
|||||||||
Specimen No.: | ||||||||||
Dia of Ram (d) (mm): | ||||||||||
No of jacks (n): | ||||||||||
Area of Rams (n × πd²/4): | ||||||||||
Length of Pipe (m): | ||||||||||
0.25 mm crack load requirement as per IS 458 - 2003 (kN/m): |
||||||||||
Hence, load to be applied for 0.25mm Crack is |
||||||||||
|
||||||||||
| Remarks : | ||||||||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|