Type W1, W2 and the load F for each test, or leave the sheet empty to print a blank format. M = W2 / W1 × 100 and ten percent fines = 14F / (M + 4) are worked out as you type; on screen, a value below 50 kN is highlighted. Typed values are saved for this project.
| DETERMINATION OF TEN PERCENT FINES VALUE [As per MoRT&H TABLE 400-2 (BS - 812 Part-111)] | |||||
Laboratory No.: |
Date Sampled: |
||||
Location/Source: |
Sampled by: |
||||
Type of Materials: |
Date of Test: |
||||
Proposed use: |
Tested by: |
||||
| S.No | Wt of Sample taken (W1)gm | Wt of Aggregate passing on 2.36 sieve (W2) in gm | Percentage passing 2.36mm sieve (M) = (W2/W1)*100 | Load in KN (F) | Ten Percent fines : 14F/(M+4) (KN) |
| Note: Sample should be passing 14mm sieve and retained on 10mm sieve | |||||
| Specification Limit: Minimum 50 kN | |||||
| Remarks :- | |||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|