Type the chainage and the irregularity readings (mm) on the median and shoulder sides, and the observed counts against the MoRTH limits, or leave the sheet empty to print a blank format. Readings above the 4 mm limit are highlighted on screen. Typed values are saved for this project.
| SURFACE IRREGULARITY CHECK | |||||
Location /Chainage: |
Date of Testing: |
||||
Layer: |
Tested by: |
||||
| Sr. No | Chainage | Median Side | Shoulder Side | ||
| Longitudinal(mm) | Transverse(mm) | Longitudinal(mm) | Transverse(mm) | ||
| Acceptance Criteria as per MORT&H table 902.2 | As per MORT&H Clause 902.4 | |||||
| Location | Longitudinal(mm) | Transverse(mm) | For Pavement Surface (Bituminous and cement concrete) | 3mm | ||
| For Bituminous base courses | 6mm | |||||
| Irregularity(mm) | 4 | 7 | 4 | 7 | For Granular sub base/base courses | 8mm |
| In 300Rmt Length | 15 | 2 | 15 | 2 | For sub base under concrete pavement | 10mm |
| Observation | For Subgrade | 15mm | ||||
| In 75Rmt Length | 9 | 1 | 9 | 1 | ||
| Observation | ||||||
Result: OK/NOT OK: | ||||||
| Remark: | ||||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|