Type A and B for the cone, then W1, W2 and V for the bulk density, or leave the sheet empty to print a blank format. C, W3, W4, bulk density, the averages and the results are worked out as you type (W4 uses the average C). This calibration is shared by the Soil and every layer group. Typed values are saved for this project.
| CALIBRATION OF SAND POURING CYLINDER [As per IS 2720 (Part - 28)] | ||||||||||||||||
Pouring Cylinder Dia No.: |
Date of testing: |
|||||||||||||||
Pouring Cylinder No.: |
Test Conducted by: |
|||||||||||||||
Proposed use:Field Density Test |
Source of sand: |
|||||||||||||||
| Weight of Sand in Cone | Trials | |||||||||||||||
| 1 | 2 | 3 | Average | |||||||||||||
| Bulk Density of Sand | ||||||||||||||||
| Note: Sand should be clean, uniformly graded natural sand passing 1.00 mm sieve and retained on 600 micron sieve. | ||||||||||||||||
|
||||||||||||||||
| Remarks:- | ||||||||||||||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|