Type values into the sheet, or leave it empty to print a blank format. m3, densities and water content are worked out as you type; the points are plotted and MDD / OMC are read from the peak of the compaction curve (needs 3 or more points). Typed values are saved for this project.
| MODIFIED PROCTOR DENSITY [As Per IS 2720 (Part-VIII)] | ||||||||||||||||||
Lab job No.: |
Tested By: |
|||||||||||||||||
Laboratory No.: |
Sampled by: |
|||||||||||||||||
Source: |
Date of Sampling: |
|||||||||||||||||
Location: |
Date of Testing: |
|||||||||||||||||
Layer/Depth: |
Type of material: |
|||||||||||||||||
Mould No. : |
Wt.of mould (m1) :=in gms |
Volume of mould (V) :in cc |
||||||||||||||||
| Description | 1 | 2 | 3 | 4 | 5 | 6 | ||||||||||||
Rammer Wt. :- 4.89 kg
No. of blows/layer :- 25 / 55
No. of layers :- 5
|
||||||||||||||||||
| Remarks : | ||||||||||||||||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|