Type the weights and the three clock times (4, 5, 6) for each test as 24-hour HH:MM, e.g. 10:30 or 14.05, or leave the sheet empty to print a blank format. Initial setting time (5 − 4) and final setting time (6 − 4) in minutes are worked out as you type; on screen, an initial time of 30 minutes or less, or a final time of 600 minutes or more, is highlighted. Typed values are saved for this project.
| INITIAL & FINAL SETTING TIME (IS: 4031 PART - V) | ||||||||
Week No.: |
Date of Sampling: |
|||||||
Cement Brand Name: |
Sampled by: |
|||||||
Cement Grade: |
Date of Testing: |
|||||||
Location: |
Test Conducted by: |
|||||||
| S.No. | Wt. of Cement (gms) | Water 0.85% of Standard Consistancy (gms) | Time of Adding Water | Time when the needle falls to penetrate test block by 5± 0.5mm | Time when needle makes an imprission but the attachment falls to do so | Initial Setting Time >30 minutes | Final Setting Time <600 minutes | Remrks |
| 1 | 2 | 3 | 4 | 5 | 6 | (5-4) | (6-4) | |
| Remark: | ||||||||
|
Name:
Date:
Contractor's Representative
|
Name:
Date:
Concessionaire's/PMC Representative
|
Name:
Date:
IE's Representative
|